Organic light-emitting diodes are components that consist of organic compounds in which carbon is a main component. Compared to conventional light-emitting diodes, however, the luminosity and lifetime of OLEDs are currently lower, which is why they represent a current field of research.
At present, OLEDs consist of various wafer-thin layers. Some are used to transport charges, others to efficiently introduce electrons into the active layer in which light is generated. As a result, current OLEDs can easily consist of five to seven layers. Now, researchers have developed an OLED which consists only of one single layer that is supplied with electricity via two electrodes - simplifying the production of such OLEDs and paving the way for printable displays.
In their first prototype, the Mainz scientists were able to show that they can generate a brightness of the emitted light of 10,000 candela/square meter with a voltage of only 2.9 volts - this corresponds to about 100 times the luminosity of modern screens. Achieving such high luminosity at this low voltage is a record for current OLEDs. The researchers were also able to measure an external efficiency of 19%, which means that 19% of the electrical energy supplied is converted into light that comes out in direction of the viewer. Also with this value, the OLED prototype can compete with current OLEDs consisting of five or even more layers.
In continuous operation, the researchers were able to measure a so-called LT50 lifetime of almost 2000 hours at a brightness equivalent to ten times that of modern displays. Within this time, the initial luminosity has dropped to 50% of its value.
"For the future, we hope to be able to improve the concept even further and thus achieve even longer lifetimes. This means that the concept could be used for industrial purposes," explained Wetzelaer. The scientists hope that their newly developed single-layer concept - i.e. the reduced complexity of OLEDs - will contribute to the identification and improvement of the processes responsible for the reduction in lifetime.
The scientists are using a light-emitting layer based on so-called "Thermally Activated Delayed Fluorescence" (TADF). This physical principle has been known for several decades, but became the focus of OLED research about 10 years ago, when an efficient conversion of electrical energy into light was demonstrated in Japan.
Since then, researchers have been working to produce TADF-based OLEDs, as these do not require expensive molecular complexes containing rare-earth metals that are being used in current OLEDs.
