The structure of the aluminum electrolytic capacitor is bipolar. Pay special attention to the polarity when installing and using it. Do not install it. AC or reverse voltage applications may result in short circuits or damage to the capacitor: the polarity in the AC circuit may be reversed or uncertain, so bipolar capacitors are not suitable for AC applications.
1. The DC voltage applied to the capacitor terminal must not exceed its rated operating voltage, otherwise the leakage current will increase rapidly, damage the capacitor, and even short-circuit and open flame conditions may occur. In order to extend the life of the product, it is recommended to use the capacitor at 70-80% of the rated voltage.
2. The ripple current applied to the capacitor must be within the allowable range. If overloaded, the capacitor will overheat and the performance will be damaged. The machine will be damaged or even cause an open flame. Please note that the sum of the peak value of the ripple voltage and the DC operating voltage cannot exceed the rated DC. Voltage.
3. Capacitors must be used within the allowable range of their operating temperature, and room temperature operating conditions can extend the service life.
